Insatech logo

Are you looking for the safest and most compliant solution for your TOC analysis in pharmaceutical production

As your exclusive Veolia Sievers partner in the Nordics, we offer consulting, complete support, and accredited calibration of your TOC solution for your process and laboratory – including endotoxins.

Whether you operate in Sweden, Norway, Denmark, or Finland, we can help — we provide support and service across the entire Nordic region.

Call or write to our TOC team

A Key Parameter for Water Quality and Compliance

TOC (Total Organic Carbon) is a crucial measurement parameter for quality control of water, especially ultrapure water and water used in pharmaceutical production. TOC levels are also beneficially monitored for quality management of drinking water, process water, and within the utility sector.

The TOC level indicates the presence of organic material to varying degrees, whether originating from contamination, biofilm, or residues of cleaning agents after cleaning. TOC measurement is a non-specific method, meaning the reported value does not reveal the source of the contamination.

Typically, TOC is measured in the range of 0.5 ppb to 50 ppm.

See our selection of TOC analyzers

Why choose us as your partner: 

Service and support

  • 12+ years of experience with TOC in the pharmaceutical industry
  • On-site support and a dedicated TOC team continuously trained in the latest technologies
  • One Nordic competence center – one partner, one complete solution

Compliance and Regulator Assurance

  • Veolia Sievers TOC analyzer complies with Annex 1 and 21 CFR Part 11
  • Traceability and data integrity – audit-ready documentation
  • Accredited calibration (according to ISO 17025 & ISO 9001)

Operational Reliability and Performance 

  • Fast, reliable TOC results for process and water quality monitoring - whether it is related to cleaning validation or UPW/WFI 
  • Robust technology with low risk of errors or downtime
  • Suitable for both routine measurements and cleaning validation

Risk Minimization

  • Eliminate the risk of over- or underreporting with qualitative measurements
  • Data Guard and control throughout the entire data lifecycle

Ressource Optimization 

  • Ensures quality control through Process Analytical Technology (PAT)
  • Save time and reduce manual steps – more automation, fewer errors

Start optimizing your TOC process now - contact us

Our TOC Specialist Team

Would you like to have an informal talk about how you are working with TOC analysis – whether it is related to cleaning validation or UPW/WFI? Contact one of our team member.

If you are unsure who to contact, use our contact form, and we match you with the right specialist.

Insatech Medarbejdere Website SON Red
KONTAKT VORES EKSPERT

Sarah Omø Nielsen

Product Manager - TOC


Tlf: +45 2761 4517

Email: Sarah.Nielsen@insatech.com

Skriv til Sarah

Insatech Medarbejdere Website JEME
Jesper Meier

Key Account Manager - TOC & Endotoxin


Tlf: +45 2761 4537

Email: Jesper.Meier@insatech.com

Skriv til Jesper

Insatech Medarbejdere Website LASJ
Lars Bo Sjølin

TOC Service Manager


Tlf: +45 2139 0944

Email: LarsBo.Sjolin@insatech.com

Skriv til Lars Bo

Insatech Medarbejdere Website LENI
Leif Florman Nilsson

Calibration Engineer - TOC


Tlf: +45 2761 4531

Email: Leif.Nilsson@insatech.com

Skriv til Leif

Insatech Medarbejdere Website MALA
Martin Lauridsen

Calibration Engineer - TOC


Tlf: +45 2761 4544

Email: Martin.Lauridsen@insatech.com

Skriv til Martin

Insatech Medarbejdere Website LC NY
Lars Christiansen

Technical Director


Tlf: +45 2085 6083

Email: Lars.Christiansen@insatech.com

Skriv til Lars

Insatech Medarbejdere Website LJ NY
Leif Jensen

Lab Manager - Metrology Laboratory


Tlf: +45 2085 6065

Email: Leif.Jensen@insatech.com

Skriv til Leif

Insatech Medarbejdere Website IHH NY
Inge Hassenkam Hansen

Order Handling - Service


Tlf: +45 2761 4563

Email: Inge.Hansen@insatech.com

Skriv til Inge

Trusted by Veolia Water Technologies & Solutions

Insatech has been an exclusive partner for Veolia Analytical Instruments in Norway, Sweden, Finland and Denmark for the past 10 years. Their dedicated team of experts provides excellent sales and service support, consistently investing in training for both areas.  
Over the past decade, Insatech has successfully supported major customers, handling everything from laboratory needs to water for injection systems. Their on-site lead time and application support, typically less than 72 hours, are highly valued by customers.
Didier Morand - EMEA Indirect sales manager - Veolia
Insatech_Sievers_M500_online_TOC_Analyzer

Accredited Calibration 

On-site, we perform accredited calibrations on:

  • TOC - As the only one in the world
  • Conductivity equipment

In addition to our traceable and accredited on-site calibrations, many of our calibrations are carried out in our own calibration laboratory, where the controlled environment ensures that your calibration always meets the requirements for accreditation.

In-house, we perform accredited calibrations on:

  • TOC analyzers
  • Conductivity equipment
  • Temperature sensors

See how easy you order on-site calibration

 

Did you know that we are the only one in the world,
who perform accredited TOC calibration on-site?
Lars Bo Sjølin - TOC Service Manager, Insatech

 

Accredited calibration laboratory

Our accredited calibrations are performed in our 180 m² calibration laboratory, designed according to the box-in-box principle. This setup eliminates external influences and ensures a stable temperature environment.

Environmental data from various built-in sensors is sent directly to screens at each workstation, allowing our technicians to quickly read the environmental parameters and include them on your calibration certificate. Our calibration laboratory is also monitored by DANAK to ensure compliance with the international standard ISO/IEC 17025:2005.

Kalibreringsteknikere i Insatechs kalibreringslaboratorie

Which TOC analyzer should I choose?

It depends on your measurement range and medium – see more in the overview or contact us for clarification.

Insatech SUEZ Sievers 300 40020 TOC Analyzer Spectrum Lr 2 16 9

Relevant products (in Danish):

Insatech_Sievers_M500_online_TOC_Analyzer

Sievers M500 Online TOC

Til måleområdet 0,03 ppb til 2,5 ppm med høj målenøjagtighed samt mulighed for ledningsevnemåling. On-line detektion af kritisk organisk kontaminering eller total organisk kulstof (TOC) i ultrarent vand eller WFI - water for injection

Insatech SUEZ Sievers M9 Family TOC Analyzer 16 9

Sievers M9 Total Organic Carbon (TOC) Analyzer (0,03 ppb...50 ppm)

Sievers M9 Total Organic Carbon (TOC)-analysatorer giver stabile og nøjagtige data til ultrarent og pharmaceutisk vandovervågning, rengøringsvalidering og andre applikationer. Disse analysatorer har et måleområde fra 0,03 ppb...50 ppm og bygget til at overholde kravene til pharmacopeia og dataintegritet 21 CFR Part 11.

Insatech SUEZ Sievers M5310 C Family With Autosampler 16 9

Sievers M5310 C Total Organic Carbon (TOC) Analyzer (4 ppb...50 ppm)

Sievers M5310 C Total Organic Carbon (TOC) analysatorer er designet til drikkevandsindustrien og overvågning af vandkvalitet. Disse analysatorer har et måleområde fra 4 ppb til 50 ppm og bygget til at overholde kravene til SM 5310 C og US EPA 415.3.

Insatech SUEZ Sievers Innovox Family 16 9

Sievers InnovOx Total Organic Carbon (TOC) Analyzer (50 ppb...50000 ppm)

Fra industrielt procesvand og spildevand til koncentreret saltvand er Sievers InnovOx Total Organic Carbon (TOC) analysatorer designet til at måle organisk kulstof på tværs af en bred vifte af vandprøver. Med et dynamisk driftsområde på 50 ppb til 50.000 ppm sikrer denne analysator overlegen TOC-genfinding og nøjagtighed med dens patenterede Supercritical Water Oxidation-teknik. Denne teknik gør analysatoren mere robust og giver mere oppetid ved udfordrende prøvesammensætninger.

Insatech Reference Standarder 1

Sievers TOC reference standarder

Certificerede TOC referencestandarder, der anvendes til verifikation og justering af TOC instrumenter

Insatech 5 Vials TOC 1

Sievers TOC Vials

Sievers TOC vials fås i forskellige udgaver, så du kan få det prøveglas, der passer bedst til netop din applikation.

Still unsure about your TOC solution?

Contact our experts – we’ll help you find the right setup for your needs.

Currently, Insatech supports over 120 units across the Nordic territories. This success is a result of supplying genuine parts, ISO 170025 certified solutions, and full validation services following ICH Q2R2 for M9 or M500.
Our next goal is to implement our open Lysate platform for endotoxin, which will help conserve resources by using 90% less lysate and being compatible with any supplier.
Didier Morand - EMEA Indirect sales manager - Veolia

Bacterial Endotoxins Test (BET)

Bacterial endotoxins pose significant risks in pharmaceutical production, making reliable testing essential to meet strict quality standards. BET is a key method for detecting endotoxins from gram-negative bacteria.

Why choose us for your BET solution?

  • Extensive expertise in BET for pharmaceutical applications
  • Specialists updated on the latest techniques and regulations
  • Advanced instruments ensure precise and reliable results
  • Fast, seamless integration into your production processes
  • Uses up to 90% less Limulus Amebocyte Lysate (LAL)

Relevant products (in Danish): Sievers Eclipse

Contact us for more information

Suez Sievers Endotoksin Eclipse

FAQ

Let us match you with the right TOC team member

Fill out the form below, and we’ll connect you with the right specialist to help you with your TOC calibration needs. We usually respond within one business day.

Contact us

Consent for storing of submitted data *


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 

Tilbage til toppen

Search